Aico Ei144RC Heat Alarm Mains Powered with Battery Backup

Aico Ei144RC Heat Alarm Mains Powered with Battery Backup

Obsolete, replaced by Aico Ei144E Heat Alarm Mains Powered with Battery Backup

• Fixed temperature fast response thermistor type sensor, range 58°C ± 4°C
• 9V Alkaline Battery back-up
• Easi-fit base
• Built in Test/Hush button
• Advanced suppression and calibration technology
• Interconnectable to other Ei mains powered alarms
• Memory feature indicates if an alarm has been previously activated
• One person test feature
• Low power cell warning
• Kitemarked to BS5446 Pt 2:2003
• 5 Year Guarantee

The Ei144 is a Heat Alarm that runs on 230V AC mains power, and has a 9V PP3 Alkaline Battery back-up capable of lasting up to 4 years in standby mode and capable of powering the alarm for up to 2 years without mains power.

The alarm gives a fire warning when adequate heat enters the alarm.

The alarm is supplied with an Easi-fit base that allows very quick and simple installation of the smoke alarm, combined with simple alarm head removal and replacement. The Easi-fit base automatically connects both mains power and battery as the alarm slides on.

The alarm can be controlled remotely by either a "Test, Silence and Locate" switch or a Manual Call Point. If the alarm is connected to other Ei RC mains powered alarms then the whole system can be controlled remotely. Up to 20 alarms can be interconnected.

The alarm has other advanced features such as built in circuitry to aid suppression of voltage transients and RF interference to further reduce the chances of false alarms under such conditions.

The alarm has a one person test feature which allows a person to test if the alarms are interconnecting. When releasing the test button, the other alarms in the system will continue to sound for a further 3 seconds so you can hear if they are linking.

The alarm has a memory feature which will indicate if an alarm has been previously activated within a 24 hour period by flashing twice every 40 seconds.